Are terminals and plugs dirty? Wipe any dirt off terminals and plugs before connecting.Ħ. Is set to the proper position? Adjust so that the channel level indicator lights up to the orange indicator at the peak level.ĥ. Is set to the proper position? Adjust so that the master level indicator lights up to the orange indicator at the peak level.Ĥ. For details, see "Connecting input terminals" and "Connecting output terminals" in the operating instructions.ģ. Are connection cables properly connected? Connect the connection cables properly. Turn the selector switch and set it to the channel's input source.Ģ. Is the selector switch set to the proper position? In this case, use the button to input the BPM value manually.ġ. Is the BPM value displayed on the DJ player's display unit? If the BPM value is not measured on the DJ player, the BPM value cannot be displayed on this DJM. to the CH connecting to the audio cable 2) Disconnect the DJ player's link cable (or turn its power off), or use the button to input the BPM value manually.ģ-b. Try the followings: 1) Change the PLAYER No. of the CH you are playing and the LINK-connected DJ player is the same, the BPM value might be obtained via the LINK from the DJ player.
#Pioneer djm 2000 nexus send return pro#
If this unit is LINK-connected to a Pioneer DJ player supporting PRO DJ LINK, check the following items as well.ģ-a. In this case, use the button to input the BPM value manually.ģ. Depending on the track, the BPM value may not be correctly measured. Adjust the knob so that the channel level indicator lights up to around at the input sound's peak level.Ģ. If the audio input level is too high or too low, the BPM value may not be correctly measured.
0 kommentar(er)
